KP series General purpose thermostats (With SPST switch)
- It is not possible to collapse or deform the top of the cover to avoid changes in operating temperature or other properties.6. Do not allow liquid to penetrate inside the thermostat!
WYD Temp Limiter For High-power Appliance 25A
- WYD Series Three-phase Temperature Limiter, good safety and long life. It is mainly used in high-power electric waterheaters, electric boilers and electric appliances. Over temperature protectors for commercial and household appliances such as heating, electric frying pans, etc.
KSD314-N Series One-shot Type overheat protector
- KSD314-N series thermostat is a primary action (SOD) overheat protector. Its characteristic is that after reaching the operating temperature, the thermostat will be disconnected and kept until it is turned back on, which acts like a fuse. The product's disconnection temperature is not affected by the operating current, so its rated current can reach 35A, which is better than the fuse.
KSD301-G Ceramic Auto Reset Thermostat
- KSD301-G Ceramic Auto Reset Thermostat
Product introduction: KSD301-R-G series snap-on thermostat is a small (disc diameter 1/2 inch) double-plate thermostat with a casing; single-pole single-throw, working under resistive load. Product application: widely used in coffee makers, water dispensers, toasters, microwave ovens, electric heaters, portable refrigerators and other small household appliances for temperature protection, is an important device in heating small appliances.
KST Adjustable Bimetal Thermostat
- KST501 series adjustable thermostat is designed for High- power loading appliance with maximum current of 16A. Thermostat is operating by sensing ambient heat and the heat transmit through the metal mounting plate. It has various mounting design customized for different appliance upon requirements. Widely used in fan heater, oven, and convection heater.
ZR-M Thermostat/Humidistat Control
- Combined humidistat and thermostat in one housing and, at the same time, monitors the relative humidity and the temperature independently of each other.And condensation build-up and corrosion is prevented.